Call us @ (804) 282-0438
6007 Broad Street, Richmond, VA 23230
Italian audio furniture · Richmond, Virginia
Give your system the space it needs. Explore Italian-made hi-fi racks, speaker stands, turntable wall shelves, and vinyl storage with configuration advice from Audio Exchange.
Choose by the job the furniture needs to do, then refine the series, dimensions, and finish. We’ll help match the support to your components and room.
For a component system
Explore S2, S3, S4, and S5 rack options for hi-fi and AV systems. Start with the component count and footprint, then compare shelf spacing, construction, and finishes.
S3-4 shown. Usable shelf space, clearances, and load ratings vary by series and configuration.
Ask about this support ↗Explore manufacturer details ↗
For a more substantial foundation
Explore the Hyperspike family, including HF, HF Èlite, HW, and HY. Compare the formats and construction around your system and the furniture’s place in the room.
HF-3 shown. We’ll review the exact dimensions, configuration, and finish of the selected model.
Ask about this support ↗Explore manufacturer details ↗
For bookshelf loudspeakers
Explore Solidsteel speaker supports, including the SS Series and newer UL Series. Choose around your speaker, seated listening height, and the stand’s footprint.
SS Series shown. Speaker weight, base dimensions, and top-plate fit need to be checked together.
Ask about this support ↗Explore manufacturer details ↗
For a wall-mounted analog setup
The WS Series gives your turntable a dedicated wall-mounted platform. Consider it when the equipment layout or available floor space calls for a different approach.
WS-5 shown. Wall structure, suitable fixings, turntable footprint, and safe installed load must be confirmed.
Ask about this support ↗Explore manufacturer details ↗
For a separate power amplifier
A dedicated amp stand provides a low support for a power amplifier outside the main rack. Explore available S Series and Hyperspike options for your equipment.
S3-A shown. Check the amplifier’s footprint, weight, ventilation, and cable connections.
Ask about this support ↗Explore manufacturer details ↗
For records and the system that plays them
The VL Series combines room for records with support for audio components. Explore a wider arrangement that keeps your listening setup and favorite albums together.
VL-3 shown. Review shelf layout, record storage needs, and the full width available in your room.
Ask about this support ↗Explore manufacturer details ↗
Practical details, considered early
A rack should accommodate the equipment you own and the way you use it. Bring a component list and measurements so we can work through the details together.
Measure width and depth, including feet, connectors, and cable bends. Allow room to operate a turntable lid or reach rear connections.
Use the component manufacturer’s ventilation guidance when selecting shelf clearance. A component fitting physically does not always mean it has enough airflow.
Check individual component weights against the exact shelf or stand rating. Review leveling and appropriate floor protection for the selected model.
For speakers, review height and top-plate fit. For wall shelves, confirm the supporting wall and fixings before planning an installation.
Audio Exchange · Richmond
Share your component or speaker models, dimensions, weights, and a few notes about your room.
Compare the appropriate ranges, shelf layout, clearances, and available finishes with our team.
Review the exact configuration, current quote, availability, and delivery or installation requirements before ordering.
Start with the equipment and available space. S Series covers a range of hi-fi and AV supports, Hyperspike offers additional high-end rack formats, and specialist stands or wall shelves address a particular component. We’ll help narrow the options.
Some Solidsteel ranges are modular and offer additional shelves or spacer kits. Options and compatibility depend on the exact series and model, so confirm the parts and final layout with us before ordering.
We’ll check your speaker model, weight, base dimensions, stand height, and top-plate fit. Share the speaker model and your seated listening height as a starting point.
The supporting structure and mounting hardware must be suitable for the installed load. Share your wall construction and turntable details so we can discuss feasibility and appropriate installation requirements.
Yes. The VL Series combines vinyl storage with support for audio components. We can help review the configuration against your record collection, component layout, and available space.
Request a tailored quote for your chosen model, size, configuration, and finish. Audio Exchange will confirm current pricing, availability, and delivery or installation options for the order.
Personal advice. A tailored quote.
Tell us what you want to support, which components you use, and the space available. We’ll help narrow the Solidsteel options and prepare a tailored quote.
Call (804) 282-0438Visit Audio Exchange ↗6007 Broad Street · Richmond, VA 23230
Thanks for subscribing!
This email has been registered!
