Hana Umami Black

The Hana Umami Black is a no-compromise moving-coil cartridge that debuts Hana’s diamond cantilever and new high-efficiency “OKD” generator for breathtaking resolution, micro-detail, and low distortion.
This product is made-to-order and not kept in stock. Lead time will vary depending on the manufacturer’s current production schedule.
$11,500.00
$11,500.00

Free Express 2 Day Shipping

Hana Umami Black – Low Output MC Phono Cartridge

The Hana Umami Black is a no-compromise moving-coil cartridge that debuts Hana’s diamond cantilever and new high-efficiency “OKD” generator for breathtaking resolution, micro-detail, and low distortion. Hand-assembled in Japan by Excel Sound and finished in black Urushi lacquer over A7075 duralumin, Umami Black delivers reference-grade musicality with rock-solid tracking and vanishingly low noise. (0.3 mV output, 11.3 g body)

Key Highlights

  • Diamond cantilever for the stiffest, most direct energy transfer from groove to generator.
  • OKD high-efficiency MC generator with the world’s first integrated pole piece + rear yoke and an inverted U-shaped front yoke for optimized flux and lower losses.
  • Microline nude stylus traces inner grooves cleanly, reducing IGD and revealing low-level detail.
  • Hybrid Carbon permalloy armature (2 mm square, 78% carbon-infused Ni-Fe) hand-wound with 30 μm 4N copper for ultra-low moving mass and speed.
  • Open-air “Auricle” duralumin body with thermoset Urushi lacquer finish controls resonances while showcasing premium craftsmanship.
  • Easy system matching: 0.3 mV output, 6 Ω internal impedance, recommended load > 60 Ω.

Hear More from Your Records

Umami Black’s diamond cantilever and Microline stylus unlock lifelike dynamics, airy soundstage depth, and black backgrounds. Its generator architecture improves efficiency and linearity for superb transient response and unforced musical flow. Pair it with a quiet, adjustable MC phono stage and a well-matched tonearm to experience its full potential.

Craft, Materials & Design

The A7075 duralumin “open air” body is finished in black Urushi lacquer via a thermosetting process, chosen for rigidity and damping. Inside, a rare-earth neodymium magnet drives the hybrid Carbon armature and copper coils, while cryogenic treatment is applied to the generator assembly and gold-plated pins for optimal conductivity and stability.

Technical Specifications

Cartridge Type Low Output Moving Coil (MC)
Output Voltage 0.3 mV
Internal / Coil Impedance 6 Ω
Recommended Load > 60 Ω (MC phono stage)
Stylus Microline nude diamond
Cantilever Solid diamond
Generator “OKD” high-efficiency MC with Integrated Pole Piece + Rear Yoke; inverted U-shaped front yoke
Armature 2 mm square hybrid Carbon permalloy; 30 μm 4N copper coils
Magnet Neodymium (NdFeB)
Frequency Response 15 – 50,000 Hz
Channel Separation 30 dB @ 1 kHz
Channel Balance 0.5 dB @ 1 kHz
Dynamic Compliance 10 × 10-6 cm/dyne (100 Hz) — approx. 17 × 10-6 cm/dyne (10 Hz)
Tracking Force 2.0 g (recommended)
Trackability 70 μm @ 2.0 g
Body / Finish A7075 duralumin, open-air “Auricle”; black Urushi lacquer (thermoset)
Terminals Gold-plated pins; cryo-treated generator assembly
Weight 11.3 g

Shipping:

Enjoy free shipping on orders over $99 within the continental US. For orders under $99, a $5.95 flat rate applies. Orders are processed promptly, with most orders placed by 1pm EST shipped the same day. We ship only within the continental US and cannot change shipping addresses post-purchase.

Special Order Policy:

Special order products are non-cancelable and non-returnable. Once an order has been placed and confirmed with the manufacturer, it cannot be modified or refunded. Please ensure that all details — including product selection, finish, and compatibility — are correct prior to placing your order.

At Audio Exchange, we take great care in assisting you through the selection process to ensure your special order product meets your expectations before finalizing your purchase.

Questions? Email us at audioexchangervb@gmail.com.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Related Products

Recently Viewed Products

Cursor
Vendor: Vendor
Example product title
$11,500.00
$11,500.00
Vendor: Vendor
Example product title
$11,500.00
$11,500.00
Vendor: Vendor
Example product title
$11,500.00
$11,500.00
Vendor: Vendor
Example product title
$11,500.00
$11,500.00
Vendor: Vendor
Example product title
$11,500.00
$11,500.00
Vendor: Vendor
Example product title
$11,500.00
$11,500.00
Vendor: Vendor
Example product title
$11,500.00
$11,500.00
Vendor: Vendor
Example product title
$11,500.00
$11,500.00
Vendor: Vendor
Example product title
$11,500.00
$11,500.00
Vendor: Vendor
Example product title
$11,500.00
$11,500.00