Sonus Faber Vox G3 Center Channel Speaker
The Sonus Faber Vox G3 is the dedicated center channel of the Homage Collection and the sonic anchor of a reference-grade home theater system. Designed to reproduce dialogue with exceptional clarity, tonal richness, and precise placement, Vox G3 carries the same acoustic character and handcrafted Italian design language as the current Homage loudspeakers.
The third-generation Vox introduces an upgraded cabinet structure and crossover network engineered to improve vocal intelligibility both on and off axis. Its three-way architecture combines a DAD Arrow Point tweeter, dual 150 mm midrange drivers, and dual 180 mm woofers in a substantial lute-shaped enclosure finished in real wood, Italian leather, and aluminum.
Clear Dialogue Across the Listening Area
A center speaker must remain intelligible for listeners seated throughout the room, not only in the primary position. Vox G3 uses Sonus Faber’s Phase Coherent Level 3 crossover and revised phase-plug geometry to provide a smooth, consistent response at different listening distances and angles. The result is focused dialogue, natural vocal weight, and a more cohesive front soundstage.
Intono Midrange Enclosure
The dual 150 mm midrange drivers operate in a sealed Intono chamber. This internal structure reduces acoustic pressure and unwanted resonances within the cabinet, helping voices and instruments remain clean and uncolored during complex film soundtracks.
Stealth Ultraflex Bass Loading
Two 180 mm woofers are supported by Sonus Faber’s Stealth Ultraflex vented enclosure. The integrated reflex system improves airflow while helping the cabinet maintain structural rigidity, giving the Vox G3 the dynamic range and low-frequency authority needed to blend convincingly with large Homage floorstanding speakers.
Handcrafted Homage Design
The lute-shaped high-gloss cabinet combines wood, Italian leather, and brushed aluminum. Vox G3 is available in Graphite Wood, Wenge Wood, and Red Wood so it can be visually matched with the rest of a Sonus Faber Homage home theater system.
Technical Specifications
| System | 3-way; sealed Intono midrange enclosure; Stealth Ultraflex vented woofer enclosure |
|---|---|
| Tweeter | 28 mm high-power neodymium extended-range soft dome with DAD Arrow Point |
| Midrange Drivers | 2 × 150 mm with neodymium magnet systems |
| Woofers | 2 × 180 mm |
| Crossover Frequencies | 280 Hz and 2,100 Hz; Phase Coherent Level 3 |
| Frequency Response | 40 Hz–35,000 Hz |
| Sensitivity | 90 dB SPL (2.83 V/1 m) |
| Nominal Impedance | 4 ohms |
| Recommended Amplifier Power | 50–300 watts, undistorted |
| Connections | Two binding posts |
| Decoupling | Rubber pad |
| Dimensions | 12.4 × 32.9 × 15 in. (315 × 836 × 385 mm) |
| Weight | 81.6 lb. (37 kg) |
Frequently Asked Questions
Is the Vox G3 sold individually?
Yes. Vox G3 is a single center channel loudspeaker.
Which speakers are designed to match Vox G3?
Vox G3 is voiced for the Sonus Faber Homage Collection, including Guarneri G5, Serafino G2, Amati G5, and Stradivari G2.
What amplifier power is recommended?
Sonus Faber recommends 50 to 300 watts of clean, undistorted power into its 4-ohm nominal impedance.
Can Vox G3 be placed inside a cabinet?
Its depth, weight, and vented enclosure require a strong, open, well-ventilated support. For best performance, allow adequate clearance and avoid enclosing it tightly inside furniture.
Explore more models in the Sonus Faber Homage Collection.
