Store hours
All times Eastern
6007 W Broad St
Richmond, VA 23230

Nude elliptical stylus · Moving magnet cartridge
Check your tonearm mounting, cartridge weight and phono input before ordering. A headshell combo still needs a compatible tonearm.
Ask our Richmond teamIn-stock orders normally ship the same day when placed by 1 PM ET weekdays or noon Saturday, subject to holiday exceptions.
The matching stylus model is AT-VMN95EN. VM95 stylus assemblies can be changed without replacing the cartridge body. Other VM95 profiles are compatible alternatives, but change the stylus specification. VM95 styli do not fit AT95E/AT95EX or the separate VM500/700 family.
Confirm the cartridge actually fitted to your turntable. Follow the replacement stylus instructions and required tracking force; physical fit alone does not make every stylus suitable for every record or use.
For ordinary 33⅓/45 rpm microgroove records, choose a suitable C, E, EN, ML or SH stylus. AT-VMN95SP is for wide-groove 78 rpm shellac, not ordinary LPs or 45s. Match both the cartridge body and the record format.
Complete cartridges and headshell versions are separate products. Check the tonearm connector, weight and setup requirements before choosing.
Upgrade your vinyl playback with the Audio-Technica AT-VM95EN, a high-performance cartridge from the popular VM95 Series. Designed for half-inch mount turntables, this model features a 0.3 x 0.7 mil elliptical nude stylus for superior channel separation, low distortion, and excellent tonal balance across the audio spectrum.
The low-resonance polymer housing is both durable and acoustically inert, helping reduce unwanted vibrations. Threaded inserts in the cartridge body make installation simple—just two screws and no mounting nuts required. Like all VM95 Series cartridges, the AT-VM95EN shares a common body, allowing easy upgrades or replacements using any of the six replacement stylus.
Looking for the perfect stylus match? Explore our full selection of phono cartridges and accessories to complete your setup.
| Mount Type | Half-inch |
|---|---|
| Stylus Type | Elliptical Nude (0.3 x 0.7 mil) |
| Cantilever | Aluminum |
| Frequency Response | 20 – 23,000 Hz |
| Channel Separation | 23 dB (1 kHz) |
| Output Voltage | 3.5 mV (1 kHz, 5 cm/sec) |
| Tracking Force | 1.8 – 2.2 g (2.0 g standard) |
| Recommended Load Impedance | 47,000 ohms |
| Weight | 6.1 g |
Available now at The Audio Exchange, your trusted source for high-fidelity audio equipment and vinyl accessories. Visit our Richmond, VA storefront or contact us for expert recommendations and home audio installation services.
The model name tells you whether you are buying a cartridge, a replacement stylus, or a cartridge with a headshell.
C is conical; E is bonded elliptical; EN is nude elliptical; ML is MicroLine; SH is Shibata. These profiles have different playback and setup characteristics.
SP is for wide-groove 78 rpm shellac. It is not the choice for ordinary LPs or 45s, even though the stylus fits the same VM95 body.
Compare Audio-Technica cartridges and styliNeed help choosing an Audio-Technica turntable, cartridge, replacement stylus or headphones? Contact Audio Exchange with your equipment model and what you want to improve.
Free shipping on orders over $99 within the contiguous US; $5.95 flat rate below $99. In-stock orders placed by 1 PM ET Monday–Friday or noon Saturday normally ship the same day. Availability and holiday exceptions apply. See our shipping policy for full details.
Most items may be returned within 30 days in like-new condition. Open-box headphones, cartridges and styli are subject to a 15% restocking fee. Opened in-ear headphones and cartridges or styli with a broken needle are non-returnable. Special-order products are non-refundable. Read our refund policy before opening or installing your purchase.
Thanks for subscribing!
This email has been registered!