Call us @ (804) 282-0438
6007 Broad Street, Richmond, VA 23230




This item is made-to-order and may be subject to manufacturer restrictions. Contact us for additional information or inquiries.
The Magico M7 floorstanding loudspeakers are a four-way, six-driver design with a carbon-fiber-and-aluminum enclosure and Gen 8 Nano-Tec cone drivers. Conceived as an all-passive counterpart to the semi-active M9, the M7 separates midrange, midbass and deep-bass duties while keeping the crossover system inside the speakers.
The monocoque carbon-fiber shell joins machined aluminum baffles using front-to-back tension rods. Constrained-layer damping helps control cabinet vibration, while curved surfaces reduce diffraction. A bespoke support system using MPOD technology provides a stable foundation.
The 28mm diamond-coated beryllium tweeter shares its design with the M9. A dedicated 5-inch midrange, two 9-inch midbass drivers and two 12-inch woofers use aluminum-honeycomb cores between graphene-infused carbon-fiber skins. This construction balances stiffness, low mass and damping.
The separate midbass section handles the transition between voices and instruments and the lowest octaves. This four-way arrangement allows each driver group to work within a more focused operating range.
Magico’s Elliptical Symmetry Crossover uses components from Mundorf and Duelund to integrate all six drivers. Unlike the M9, the M7 does not require an external MXO crossover or active bi-amplification. An appropriately matched external power amplifier drives the internal passive network.
The Magico M7 price is $375,000 per pair. Contact Audio Exchange for current finish options, lead time and installation planning.
| Design | Four-way, six-driver passive floorstanding loudspeaker |
|---|---|
| Tweeter | 1 × 28mm diamond-coated beryllium |
| Midrange | 1 × 5-inch Gen 8 Nano-Tec |
| Midbass drivers | 2 × 9-inch Gen 8 Nano-Tec |
| Bass drivers | 2 × 12-inch Gen 8 Nano-Tec |
| Sensitivity | 92 dB |
| Nominal impedance | 4 ohms |
| Frequency response | 18 Hz–50 kHz |
| Power handling | 50–2,000 watts |
| Dimensions | 65″ H × 29″ D × 19″ W |
| Weight | 526 lb (239 kg) per speaker |
Choose amplification suited to a 4-ohm load and your intended listening levels. At 526 pounds per speaker, delivery access, floor support and final placement should be evaluated before purchase. Room dimensions and acoustics are also central to the completed system.
Call (804) 282-0438 to discuss availability, amplification, delivery and installation. Explore our Magico speaker collection or plan a visit to Audio Exchange in Richmond, Virginia. Contact us ahead of your visit to confirm demonstration availability.
Thanks for subscribing!
This email has been registered!